Decoupage Furniture

Just in time for the weekend. I found this on diyideas.com and thought it was a fantastic idea, with endless possibilities. Let me know if you try it!

Learn how easy it is to decorate your furniture with decoupage.

Decoupage Furniture Materials:

Furniture piece
Plain paper for template
Art print or poster
Glue or decoupage medium
Foam brushes
Water source

Step 1: Clean the furniture item (if needed, fill in chips or nicks with spackling compound). On a plain piece of paper (such as a butcher paper), trace the shape of the furniture piece as a template.

Step 2: Move the template around the image to find the section you want to cover the furniture. Using a pencil, lightly trace the shape of the template over the image. Tip: Avoid decoupaging with thin paper, such as newsprint or rice paper, because it wrinkles. If you have a design you love that’s on thin paper, take it to the copy store for laser printing (ink-jet copies smear in water).

Step 3: Be sure to use sharp scissors when cutting. It’s better to err on the side of having too much image—overlap is easily trimmed. If the image is too small, cut off a little piece of the print as a patch.

Step 4: Paint household glue (such as Elmer’s) over the entire surface of the item using a foam brush. The glue should still be wet when the paper is positioned on the surface.
Tip: For a clean edge, trim any overlaps with a very sharp knife when the paper is dry and stiff with glue.

Step 5: Submerge the paper in the water just long enough for it to relax, about 10 seconds. This will make it easier to mold the paper to your furniture.

Step 6: Align the paper with the furniture edges. Keep your hands wet or the paper will tear. Use a wet sponge and wet brayer to work out excess glue, water, and air. Work hands and tools outward from the center to flatten the surface. Check frequently within the first hour after application to smooth late-forming air bubbles with wet fingers. Dry overnight. Tip: If the paper tears during the smoothing process, fix it as best as you can and then touch up with a marker before applying polyurethane sealer.

Step 7: Apply three to five coats (one per hour) of acrylic polyurethane with a foam brush.

1 comment:

Haven and Home said...

Love this idea! I (think) I am doing a post on something like this later this week. Your header is so cute!!!!!!

Related Posts Plugin for WordPress, Blogger...